LMV RANGE
ACCESSORIES ORDERING INFORMATION

EARTH LINK
Used in conjunction with outlet accessory sets to provide earth continuity to fixed and free bodies. to be fitted in accordance with instructions (click here) & on packing label. Must be fitted to conform to the safety standards of CECC 75201-004

  SHELL SIZE 1 SHELL SIZE 2
Weald Pt. No. LMA/1/80020/015 LMA/1/80269/015
CECC pt. No. CECC 75201-004 A 01 L CECC 75201-004 A 02 L


OUTLET NUT
For fixed square flange connectors.

  SHELL SIZE 1 SHELL SIZE 2
Weald Pt. No. LMA/2/07569/001 LMA/2/07570/001
CECC pt. No. CECC 75201-004 A 01 J A CECC 75201-004 A 02 J A



OUTLET NUT
For fixed round flange connectors.

  SHELL SIZE 1 SHELL SIZE 2
Weald Pt. No. LMA/2/07157/001 LMA/2/07158/001
CECC pt. No. CECC 75201-004 A 01 K A CECC 75201-004 A 02 K A


LMV CONNECTOR/ACCESSORY ASSEMBLY TOOLS ORDERING INFORMATION
Tools required for locking cable entry fittings and for mounting fixed units to panels

SPECIAL SPANNER
Used on fixed units to facilitate tightening of panel locking rings

  SHELL SIZE 1 SHELL SIZE 2
Weald Pt. No. LMT/2/00574 LMT/2/00575
CECC pt. No. CECC 75201-004 C 01 A E CECC 75201-004 C 02 A E



TOMMY BAR
Used with special spanner (as shown).

  SHELL SIZE 1 SHELL SIZE 2
Weald Pt. No. LMT/2/00573 LMT/2/00573
CECC pt. No. CECC 75201-004 C 00 D E CECC 75201-004 C 00 D E


DOUBLE ENDED SPANNER
Used in conjunction with body holder to facilitate tightening of outlet nuts and panel locking rings.

  SHELL SIZE 1 SHELL SIZE 2
Weald Pt. No. LMT/2/00564 LMT/2/00565
CECC pt. No. CECC 75201-004 C 01 C E CECC 75201-004 C 02 C E


BODY HOLDER
Used in conjunction with double ended spanner - locates on front face of connectors.

  SHELL SIZE 1 SHELL SIZE 2
Weald Pt. No. LMT/2/00261 LMT/2/00262
CECC pt. No. CECC 75201-004 C 01 B E CECC 75201-004 C 02 B E



Next Page>>
<<Previous page