LMV RANGE

CHARACTERISTICS

Environmental category 55/100/56
Low pressure severity 300 mbar
Temperature range -55°C to +100°C
In practice the temperature will be de-rated to that of the cable.
Maximum current per contact through both live and neutral contacts simultaneously at 70°C ambient temperature Size 1 connector 7.5 amps
Size 2 connector 20 amps
Working voltage dc or ac peak (sea level)
Establishment of the electrical safety factors is the responsibly of the user
Size 1 connectors 354 volts
Size 2 connector 354 volts
Voltage proof dc or ac peak Size 1 connector 2000 volts
Size 2 connector 2000 volts
Number of contacts 3 (earth, live and neutral)
Contact termination Solder buckets
Solder bucket bore diameter (max) Size 1 Size 2
Earth 1.75 mm 2.75 mm
Live 1.40 mm 2.75 mm
Neutral 1 .40 mm 2.75 mm
Contact finish Gold plated
Polarisation By shell keys and keyways
Insert orientation Standard insert position 0
Special positions available
Insert material Polychloroprene and plastic
Housing (Shell) material Brass
Housing (Shell) finish as standard (Special finishes available) Olive drab chromate conversion
over cadmium plate
Sealing Environmentally resistant with barrier or barrier and panel seal. Insert rated at lcm3/hr max leakage at pressure differential of 1 bar


SCHEMATIC SHOWING LMV CONNECTOR SYSTEM


It is recommended that a connector with socket/female contacts is wired to the power source
and that the supply is always isolated before connection or disconnection.



Next Page>>
<<Previous page