| LMF/LMG WIRING INSTRUCTIONS SINGLE CORE CABLES TOTALLY UNSCREENED |
|
 |
|
| USING
A GLAND PLUG AND RETAINING GLAND |
|
|
1)
Strip and tin dip cable ends. Thread on components in the order shown. Where necessary a suitable approved lubricant should be used on all cable sheaths and on surface of gland plug. |
|
|
2) Solder conductors to connector contacts. Slide forward retaining gland over soldered joints. Position outlet and secure with outlet nut. Slide retaining gland into neck of outlet and screw clamp on to outlet. Screw down clamp jaw on to gland plug. |
 |
|
USING A RETAINING GLAND ONLY |
|
| 3) Assemble as above omitting gland plug and thrust ring. |
 |
|
|
|
 |
|