LMF/LMG WIRING INSTRUCTIONS MULTICORE CABLE. TOTALLY UNSCREENED METHOD 2 |
|
 |
|
| 1) Strip back outer sheath. Strip insulation from each conductor and tin dip. Thread on to cable:- clamp, thrust ring (or packing piece), union gasket, sealing ring, outlet nut, outlet and outlet gasket. Fit insulating sleeves to conductors. |
|
|
2) Solder conductors to connector contacts. Slide insulating sleeves over soldered joints. Position outlet gasket and outlet at rear of connector and secure with outlet nut. Slide sealing ring into neck of outlet and union gasket adjacent to sealing ring. Screw clamp on to outlet. Secure clamp to cable by screwing down clamp jaw. |
 |
|
|
|
|
|
|
 |
|